Chief Display App Installation and Configuration
This article discuses the set up and tips for Chief Display.
If you have any questions comments or concerns, please contact support@chief360.com
***CHIEF DISPLAY IS ONLY AVAILABLE ON WINDOWS***
If you are setting up your first display please refer to these main instructions and using the rest of the document
1. Install Display on computer
2. Create configuration
3. Assign configuration to appropriate display board
- There are two modes to the display board Non Emergency and Emergency. Non
Emergency displays the configuration items. Emergency displays incident notification.
Display board will automatically transition between the two.
We have links that require extra procedures to get working. Please contact support@chief360.comfor assistance
- Weather Widgets
- Radar with different coloring
- Weather Satellite Imagery
- Tide Chart
- Chief 360 Weekly Schedule from Other Chief 360 Users
Installing the Chief Display
You may do the following instructions from any computer. It does not have to be done on the computer that display board will be displayed from. Our Displays are cloud based.
1. Log into chiefbackstage.com on and ADMIN account. The admin account is required to access the Chief Display section.
2. Click on More > Chief Display in the top right corner of your browser
3. Click Install Display on the left had side of the browser.
4. Ensure there is a "Registration Code". If there is no registration code please contact your Sales Representative or support@chief360.com
5. Click "Click Here to Install on Windows"
6. Click LAUNCH in the last line of the instructions prompt
7. Once installed, launch Chief Display from the desktop
8. Once loaded, input the registration code. Your display will then load
Configuring the Chief Display
Assigning a Configuration to a display
1. Log into chiefbackstage.com and go to Chief Displays
2. Click List Displays on the left had side of your web browser
3. Click Edit on which display you wish to edit.
4. In the drop down select which configuration you would like to use.
Creating a Configuration
1. Log into chiefbackstage.com and go to Chief Displays
2. Click Configuration
3. Click Add Configuration and name the configuration
4. Select how long you would like an incident to display on the Display Board.
- There are two modes to the display board Non Emergency and Emergency. Non
Emergency displays the configuration items. Emergency displays incident notification.
Display board will automatically transition between the two.
5. Choose whether to display Responder Status Choices in emergency mode or not (i.e Responding to Station, Responding to Scene, Available)
6. Click Update Config
7. Click Pages at the top of the prompt
8. Click Add Page
Layouts
3 Blocks - Left column spans two rows (width 50%) & Right column is split into two rows (width 50%)
2 Blocks - Left & Right - Left Block is 1/3 width and Right Block is 2/3 width
6 Blocks
9.
Choose your layout (above are references for how the layouts are
organzied).
- Each box with number is considered a Block
10. Enter Display Seconds (how long you want the page to display for before turning to the next page)
11. Click Add
12. Click View/Edit Blocks to the right hand side of the prompt
13. Click Add Block
14. Select which type of block you wish to add
- Some blocks have extra settings that may need to be configured. If unsure please contact support@chief360.com
- Sequence Number: Sequence number dictate where the block will be positioned on the screen in accordance with the layouts above
15. Click Pages at the top of the prompt
16. Ensure that under Status it says Ready. If not, check your configuratoin and ensure all block are configured properly
DataImage50.png
DataImage17.png
DataImage78.png
DataImage75.png
DataImage19.png
DataImage75[1].png
| Files | ||
|---|---|---|
|
|
DataImage50.png
21 KB
|
|
|
|
DataImage17.png
23 KB
|
|
|
|
DataImage78.png
43 KB
|
|
|
|
DataImage75.png
2 KB
|
|
|
|
DataImage19.png
1 KB
|
|
|
|
DataImage75[1].png
2 KB
|